An Honest Breakdown of Sex Dolls Today- The Truth

[FrankJScott]

[center][/center]

[center][size=large]CLICK FOR THE BEST SEX DOLL FEET GUIDE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
Until the moment they need them, buyers don't think about standing feet; then they find out the difference is gigantic. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. A frustrating purchase can be steered clear of in one of the simplest ways: grasp the difference before you order.

The Basic Difference Between Standing and Non-Standing Feet
At its most basic, the difference is uncomplicated. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you try to stand her. Whether the bolts are present decides everything else; they're the key.

Necessary for Photography and Display
For photography and display, standing feet are essential. With a doll that can stand unaided you get full-length poses without noticeable supports and display in a corner, a doorway, or anywhere else that needs her to be upright. Most photographers specify standing feet when ordering for this principal reason: it opens up a wide range of poses and settings that aren't possible with non-standing feet.

Metal Bolts Keep Water Out of the Feet
In the shower, too, standing feet are essential. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as unsafe. Stability in a wet environment comes from the standing feet, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a genuine safety consideration.

Water Rusts the Metal Skeleton
The shower use point needs expanding, since so many damaged dolls are down to it. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes evident, and it's fundamentally unfixable once it starts. A doll with non-standing feet should never be in the shower, no matter how cautious you are, because the water will find its way in irrespective of your precautions.

Storing Her Standing Up
Standing feet can make storage easier as well, depending on the setup. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Customers who want to display the doll rather than keep her hidden will find this a good option, and it's space-efficient if you don't have room for a hanging setup. The doll can be stored in a way that's visible and accessible thanks to the standing feet, and some buyers prefer this.

Really Tight Budgets and Standing Feet
Their downside is merely being somewhat more costly and a little heavier. Why the premium? The metal bolts add a small quantity of weight to the doll, manufacturing is more involved, and the cost normally ends up a few percent higher than a doll with non-standing feet. Ordinarily worth the additional cost, and small, the difference is still worth knowing about on a really tight budget.

The Other Disadvantage: Apparent Bolts
There's another downside: the bolts can become apparent if the feet are bare. On a doll with high-heeled shoes or open-toed footwear, the bolts might be visible in photos, which some purchasers find distracting. No reason to stay away from standing feet completely, since this slight aesthetic issue can be solved with closed shoes or footwear that hides the bolts.

Savings for Articulated Hands or a Better Wig
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Non-standing feet do the job for a bed-or-sofa doll, and what you save can go towards articulated hands, a better wig or similar upgrades. This is a completely valid choice for customers who know what they want.

Not Enough to Decide on Its Own
The softer, more pliable feel of non-standing feet, slight as it is, is more comfortable to touch for some customers. On its own this subtle difference doesn't usually justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

Trying to Stand the Doll Anyway
Buyers sometimes forget what kind of feet they have and attempt to stand the doll regardless, which is the sizable risk with non-standing feet. A widespread mistake, and a damaging one: the doll's weight is too much for the foam inside the ankle, which will tear or collapse. The result is a doll that can no longer stand even if you attempt to support her, because the feet have been permanently damaged. You're buying non-standing feet? Remember it, and don't be tempted to test their limits.

Adding Bolts Afterwards
A further question is whether a doll that doesn't have standing feet can have them retrofitted. Not readily; that's the short answer. Embedded in the soles during manufacturing, the bolts can only be added subsequently by cutting into the feet and installing new hardware, which is pricey and often doesn't work as well as the original. Better than attempting to add them later is acquiring a doll with standing feet in the first place, if you're considering a doll without them and think you might want them later.

Photography, Display or Shower: You Need Standing Feet
The sensible advice for purchasers choosing between standing and non-standing feet is straightforward. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly adequate. Not sure? Pick standing feet: nothing is off the table with them, and the small extra cost is worth paying.

A 45kg Male Doll That Can't Stand
One more thing worth mentioning: a gender consideration. Because male dolls are heavier and more tough to store in any other way, they ordinarily get more from standing feet than female dolls do. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and needs more space. The ability to store upright is given to male dolls by standing feet, and that's a genuine advantage for buyers who don't have a lot of room.

What Barefoot Photos Reveal
To finish, the aesthetic difference between standing and non-standing feet is worth noting. With the doll barefoot, the slightly harder bottom of standing feet, down to the bolts, can be evident. Some purchasers consider it less aesthetically gratifying, especially with delicate features, because of the a little industrial look of the hard soles. Softer and more natural-looking, non-standing feet are preferred by some buyers. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.

The Maintenance Angle
One more angle worth considering: maintenance. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out entirely can cause the doll to collapse. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the appropriate tool. No hardware means nothing to come loose, so non-standing feet don't have this issue and are marginally lower-maintenance in the long run.

Preventing Sliding
The bolts have an effect, too, on how the doll stands on different surfaces. On carpet, the bolts grip well and the doll is constant. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, especially if the floor is silky. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it avoids sliding. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

Non-Standing Feet Are Slightly Shorter
A final, regularly overlooked, consideration is the effect of standing feet on the doll's overall proportions. A small quantity of length is added to the foot by the bolts, which can slightly change the way the doll looks in barefoot photos. The effect is subtle and ordinarily invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. Non-standing feet lack the bolts and hence this effect, leaving the feet slightly shorter and more natural-looking.

The Bottom Line: Standing Feet Are Worth It
Posing, display, storage and shower choices that non-standing feet don't offer are opened up by standing feet, and the bottom line is that they're worth the additional cost for most customers. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out get more info bearing in mind discover this info here and full article for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]