The Only Primer on Sex Dolls Right Now- The Honest Breakdown

[FrankJScott]

[center][/center]

[center][size=large]CLICK FOR THE BEST SEX DOLL FEET GUIDE NOW[/size][/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
Buyers infrequently think about standing feet before they need them, and once they do, the difference turns out to be gigantic. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Knowing the difference before you order is among the simplest ways to dodge an annoying purchase.

Everything Follows From the Bolts
Boiled down, the difference is simple. Standing feet come with metal bolts embedded in the soles, and these allow the doll to stand upright without support. Because non-standing feet don't have these bolts, the doll can only sit or lie down; trying to stand her damages the feet. The key is the bolts, and everything else follows from whether they're there.

A Wider Range of Poses and Settings
Photography and display are where standing feet are vital. Anywhere that requires her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without visible supports. Most photographers specify standing feet when ordering for this primary reason: it opens up a wide range of poses and settings that aren't possible with non-standing feet.

Stability in a Wet Environment
Shower use makes standing feet essential too. If you want to shower with your doll, she needs to be able to stand, because lying her down in a shower is both impractical and hazardous. In a wet environment the standing feet give her stability, while the metal bolts make sure that the feet don't absorb water the way non-standing feet would. The real safety consideration is that water absorption in non-standing feet can lead to rust and eventual structural failure.

Weeks or Months Before the Damage Shows
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become visible but is basically unfixable once it starts. The water will find its way in regardless of your precautions, so a doll with non-standing feet should never be in the shower, no matter how careful you are.

Storing Her Standing Up
Storage is easier with standing feet in some setups. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient option, and for anyone who wants to display the doll rather than keep her hidden it's a solid one. Evident and accessible storage is made possible by the standing feet, which some buyers prefer.

Weight and Price Trade-Offs
The drawback of standing feet is that they're a little more costly and marginally heavier. Why the premium? The metal bolts add a small quantity of weight to the doll, manufacturing is more involved, and the price normally ends up a few percent higher than a doll with non-standing feet. Small as the difference is, and normally worth the extra cost, it's worth knowing about if you're acquiring on an incredibly tight budget.

Bolts in Photos
Another disadvantage is that the bolts can become evident if the feet are bare. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, which some buyers find distracting. You can solve this small aesthetic issue by covering the feet with closed shoes or picking footwear that hides the bolts, so don't stay away from standing feet completely because of it.

A Completely Valid Choice
They're cheaper and lighter, and non-standing feet are fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her. Non-standing feet do the job for a bed-or-sofa doll, and what you save can go towards articulated hands, a better wig or similar upgrades. Customers who know what they want can make this choice totally validly.

Feet That Feel Like the Rest of the Doll
Comfort to the touch is another point: non-standing feet are a little softer and more elastic, which some buyers prefer. A subtle difference, not generally enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

The Big Risk With Non-Standing Feet
The big risk with non-standing feet: purchasers forget what kind of feet they have and attempt to stand the doll regardless. Why is this common error so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. If you're purchasing non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.

Can Standing Feet Be Retrofitted?
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. To put it briefly, not readily, no. Embedded in the soles during manufacturing, the bolts can only be added subsequently by cutting into the feet and installing new hardware, which is expensive and often doesn't work as well as the original. Buy a doll with standing feet in the first place, rather than trying to add them later, if you're considering a doll without them and think you might want them later.

Picking Between Standing and Non-Standing Feet
Deciding between standing and non-standing feet comes with straightforward sensible advice. If any of photographing the doll, displaying her standing, or using her in the shower is on the cards, you need standing feet. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly sufficient. Unsure which to select? The small additional cost of standing feet acquires you the safer option, with no limit on what the doll can do.

Lying Down Storage Needs More Space
One more thing worth mentioning: a gender consideration. Standing feet normally help male dolls more than female dolls, since they're heavier and more tough to store in any other way. Storage lying down, which puts pressure on the body and needs more space, is the only alternative for a 45kg male doll that can't stand. A real benefit for customers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

Harder Soles Because of the Bolts
Standing and non-standing feet differ aesthetically, which is worth a final note. Standing feet have an a little harder bottom because of the bolts, and this can be evident with the doll barefoot. On dolls with fragile features in particular, some buyers find this less aesthetically pleasing, as the hard soles look a little industrial. More natural-looking and softer are non-standing feet, which some buyers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Tighten With the Appropriate Tool
A maintenance angle is also worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the fitting tool. In the long run non-standing feet are somewhat lower-maintenance, since there's no hardware to come loose and so no such issue.

Silky Floors Need Extra Support
Distinct surfaces change how the doll stands, thanks to the bolts. With carpet, the bolts grip well and the doll is stable. Extra support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a silky floor. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to prevent sliding. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

How Standing Feet Change the Look
The doll's overall proportions are affected by standing feet, a final consideration that's regularly overlooked. Because the bolts add a small amount of length to the foot, the doll can look slightly distinct in barefoot photos. The effect is subtle and normally invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions. This effect isn't present in non-standing feet, as they don't have the bolts, so the feet are a little shorter and more natural-looking.

Additional Cost for Extra Options
The bottom line is that most customers get their money's worth from standing feet, because they open up posing, display, storage and shower options that non-standing feet don't. Certain the doll will only ever be used in bed, and never displayed or photographed standing? Then skip them. Nobody else should. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out special info on top of clicking here not forgetting sites such as read more here bearing in mind his explanation together with this article alongside all you can check here together with click this over here now bearing in mind learn the facts here now together with click for more and visit this website for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]