The Ultimate Guide to Sex Dolls Right Now- The Truth

[FrankJScott]

[center][/center]

[center][size=large]DISCOVER BEST SEX DOLL FEET GUIDE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: What To Pick And Why
Until the moment they need them, buyers don't think about standing feet; then they find out the difference is huge. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Before you order, grasp the difference, which is one of the simplest ways to stay away from a frustrating purchase.

What Makes a Foot a Standing Foot
There's an uncomplicated basic difference. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. Without these bolts, non-standing feet limit the doll to sitting or lying down, and attempting to stand her will damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.

A Wider Range of Poses and Settings
Essential for photography and display: standing feet. Standing unaided, she can be photographed in full-length poses without visible supports, and displayed in a corner, a doorway, or any other spot that needs her to be upright. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the principal reason most photographers specify standing feet when ordering.

Standing Feet Are Also Essential for Showers
Showering is another case where standing feet are crucial. It's impractical and hazardous to lie her down in a shower, which is why a doll for showering with needs to be able to stand. Stability in a wet environment comes from the standing feet, and the metal bolts ensure that the feet don't absorb water the way non-standing feet would. Real safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

Why Shower Use Destroys So Many Dolls
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. There's foam or filler material inside the ankle with non-standing feet, and it absorbs water when it gets wet. It then rusts the metal skeleton inside the leg, which takes weeks or months to show, and once it's started it's essentially unfixable. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in irrespective of your precautions, no matter how attentive you are.

A Storage Option for Display-Minded Buyers
In some setups, a doll with standing feet is also easier to store. Stored upright in a corner, a wardrobe or a storage cabinet, a doll with standing feet doesn't need a hanging hook or a storage case. Purchasers who don't have room for a hanging setup will find this a space-efficient option, and it suits purchasers who want to display the doll rather than keep her hidden. Some purchasers prefer the apparent, accessible storage that the standing feet make possible.

Weight and Price Trade-Offs
The cost you pay for standing feet is that they're a little more expensive and a little heavier. A more involved manufacturing process plus a small amount of weight from the metal bolts means a price generally a few percent above a doll with non-standing feet. Though the difference is small and it's generally worth the extra cost, knowing about it matters if you're purchasing on a really tight budget.

Closed Shoes Hide the Bolts
Visible bolts are the other disadvantage, if the feet are bare. On a doll with high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, which some purchasers find distracting. It's a slight aesthetic issue, solved by covering the feet with closed shoes or opting for footwear that conceals the bolts, and not a reason to stay away from standing feet totally.

A Completely Valid Choice
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. A doll that lives mainly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Completely valid is this choice for buyers who know what they want.

The Tactile Side of Non-Standing Feet
Also, non-standing feet are slightly softer and more adaptable, something some customers find more comfortable to touch. It's worth knowing about if you're specifically looking for maximum softness, though this is a subtle difference and not typically enough to justify the choice on its own. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

Tearing and Collapse
Buyers forgetting what kind of feet they have and trying to stand the doll in any case is the big risk with non-standing feet. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a typical mistake. The result is a doll that can no longer stand even if you attempt to support her, because the feet have been permanently damaged. When you acquire non-standing feet, remember what they are and don't be tempted to test their limits.

Why Retrofitting Doesn't Work Well
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. In short, no, not easily. The bolts are embedded in the soles during manufacturing, and adding them after that needs cutting into the feet and installing new hardware, which is pricey and regularly doesn't work as well as the original. It's better to buy a doll with standing feet in the first place than to try to add them later if you're considering buying a doll without standing feet and think you might want them later.

If You're Not Sure, Choose Standing
Direct is the functional advice for buyers opting for between standing and non-standing feet. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet are perfectly acceptable if you only want to use her in bed or on a sofa and you don't care about display. If you're on the fence, go with standing feet, the safer option, because nothing is ruled out and the small extra cost is worth paying.

Why Male Dolls Need Standing Feet More
There's also a gender consideration worth mentioning. More than female dolls, male dolls ordinarily advantage from standing feet, being heavier and more difficult to store in any other way. A 45kg male doll who can't stand must be stored lying down, putting pressure on the body and needing more space. Buyers who don't have a lot of room get a real upside from standing feet, which give male dolls the ability to store upright.

A Trade-Off That Matters for Barefoot Photos
To finish, the aesthetic difference between standing and non-standing feet is worth noting. Standing feet have an a little harder bottom because of the bolts, and this can be visible with the doll barefoot. On dolls with fragile features in particular, some customers find this less aesthetically gratifying, as the hard soles look slightly industrial. Non-standing feet are softer and more natural-looking, which some purchasers prefer. Barefoot photos being a priority makes this trade-off worth factoring into your decision, since it only matters if you're photographing the doll barefoot.

Maintenance: Check the Bolts Periodically
One more angle worth considering: maintenance. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out completely can make the doll collapse. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the fitting tool. In the long run non-standing feet are a little lower-maintenance, since there's no hardware to come loose and so no such issue.

Silky Floors Need Extra Support
The bolts have an effect, too, on how the doll stands on different surfaces. Carpet is where the bolts grip well and the doll is steady. On hard flooring, the bolts can slip, particularly if the floor is silky, and the doll may need extra support to stay upright. Sliding on a hard surface? A small mat or grippy pad under the feet prevents it. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.

An Overlooked Detail: Proportions
A final consideration is often overlooked: how standing feet affect the doll's overall proportions. The way the doll looks in barefoot photos can marginally change, as the bolts add a small amount of length to the foot. This is a subtle effect, and it's usually invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. The feet are marginally shorter and more natural-looking on non-standing feet, which don't have this effect because they don't have the bolts.

What Standing Feet Open Up
Options for posing, display, storage and the shower are opened up by standing feet, which non-standing feet can't match, making them worth the extra cost for most buyers. Certain the doll will only ever be used in bed, and never displayed or photographed standing? Then skip them. Nobody else should. For all other buyers, standing feet are the better choice and among the simplest upgrades to justify. More info at this rosslink. Also check out original site for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]