A Straight-Up Lowdown on Sex Dolls Right Now- Start Here

[FrankJScott]

[center][/center]

[center][size=large]CLICK FOR THE BEST SEX DOLL FEET ADVICE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
Standing feet go unconsidered until they're needed, at which point purchasers discover the difference is gigantic. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. Comprehend the difference before ordering and you'll have steered clear of a frustrating purchase in one of the simplest ways possible.

The Bolts Are the Key
The difference comes down to something simple. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. Damage to the feet is the result of trying to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Full-Length Poses Without Visible Supports
You need standing feet for photography and display. Full-length poses without evident supports, and display anywhere that needs her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the chief reason most photographers specify standing feet when ordering.

Showering and Standing Feet
If you want shower use, standing feet are important as well. Lying her down in a shower is impractical and risky, so showering with your doll means she needs to stand. Stability in a wet environment comes from the standing feet, and the metal bolts ensure that the feet don't absorb water the way non-standing feet would. It's a genuine safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
The shower use point needs expanding, since so many damaged dolls are down to it. The ankle of a non-standing foot contains foam or filler material, which absorbs water when it gets wet. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become evident, but it's fundamentally unfixable once it starts. Cautious or not, a doll with non-standing feet should never be in the shower; the water will find its way in whatever precautions you take.

When You Lack Room for a Hanging Setup
Standing feet bring easier storage, too, in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. For purchasers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a decent option. Standing feet allow storage that's evident and accessible, something some purchasers prefer.

The Disadvantage: Somewhat Pricier and Heavier
A little more pricey and a little heavier: that's the drawback of standing feet. A few percent additional on the cost is usual compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. The difference is small, normally worth the additional cost, and worth knowing about if you're acquiring on an extremely tight budget.

Solving the Visible Bolt Problem
A further downside is the bolts becoming visible if the feet are bare. Distracting to some buyers is the possibility that the bolts are visible in photos on a doll with high-heeled shoes or open-toed footwear. Cover the feet with closed shoes or opt for footwear that conceals the bolts and this slight aesthetic issue is solved, so it's not a reason to stay away from standing feet totally.

Savings for Articulated Hands or a Better Wig
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly sufficient when the doll will mostly be in a bed or on a sofa. This is a completely valid choice for buyers who know what they want.

Comfortable to Touch
Non-standing feet are also marginally softer and more adaptable, which some buyers find more comfortable to touch. On its own this subtle difference doesn't normally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

A Common and Costly Mistake
The sizable risk? Buyers forget what kind of feet they have and try to stand the doll anyway. Why is this typical oversight so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. Buying non-standing feet? Remember they're non-standing, and don't be tempted to test their limits.

Buy Standing Feet in the First Place
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. Briefly: no, and definitely not readily. Manufacturing is when the bolts get embedded in the soles; later, you'd have to cut into the feet and install new hardware, which is expensive and regularly doesn't work as well as the original. Attempting to add standing feet later is worse than purchasing a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, buy them first.

Which Feet Should You Order?
For purchasers who are choosing between standing and non-standing feet, the sensible advice is direct. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly adequate. If you're not sure, standing feet are the safer option, because they don't limit what you can do with the doll and they're worth the small additional cost.

Weight and Storage Together
Gender plays a part too, and it's worth mentioning. Standing feet benefit male dolls more than female dolls in general, as they're heavier and harder to store any other way. Stored lying down, which puts pressure on the body and requires more space, is how a 45kg male doll that can't stand has to be kept. Buyers who don't have a lot of room get a real advantage from standing feet, which give male dolls the ability to store upright.

Industrial-Looking Soles on Delicate Dolls
There's a final note to make on the aesthetic difference between standing and non-standing feet. Standing feet are slightly harder at the bottom, because of the bolts, and this can be visible when the doll is barefoot. Hard soles look a little industrial, which some purchasers find less aesthetically pleasing, especially on dolls with delicate features. More natural-looking and softer are non-standing feet, which some purchasers prefer. For barefoot photos as a priority, factor this trade-off into your decision; otherwise, it only matters if you're photographing the doll barefoot.

The Maintenance Angle
There's a maintenance angle as well that's worth considering. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. By gently twisting the bolts every few months you can check them, and if they feel loose, use the fitting tool to tighten them. In the long run non-standing feet are somewhat lower-maintenance, since there's no hardware to come loose and so no such issue.

Stability Depends on the Surface
How well the doll stands on distinct surfaces depends in part on the bolts. On carpet, the doll is constant, the bolts gripping well. Especially if the floor is smooth, the bolts can slip on hard flooring, and the doll may need additional support to stay upright. A small mat or a grippy pad under the feet will avoid sliding on a hard surface, so consider one. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.

Bolts Add a Little Length to the Foot
A final consideration is regularly overlooked: how standing feet impact the doll's overall proportions. A small amount of length is added to the foot by the bolts, which can slightly change the way the doll looks in barefoot photos. Planning to photograph the doll barefoot and caring about exact proportions? This subtle effect, ordinarily invisible in shoes, is worth knowing about. No bolts means no such effect with non-standing feet, whose feet are slightly shorter and more natural-looking.

Additional Cost for Extra Options
Standing feet are worth the additional cost for most purchasers, which is the bottom line, because they open up posing, display, storage and shower options that non-standing feet don't. Only customers certain that the doll will stay in bed, never displayed or photographed standing, should skip them. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this A Quick Word on Modern Sex Dolls- What Nobody Tells You 793128c together with A No-BS Look at Sex Dolls Today- The Honest Breakdown and The Essential Overview of Sex Dolls Today- What to Expect. Also check out click reference bearing in mind source material here as well as discover more here together with check out this site alongside all yoururl.com which is worth considering with click here to find out more not to mention more information which is worth considering with go to website bearing in mind check it out and dig this for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]