The Ultimate Primer on Sex Dolls Right Now- What You Need to

[FrankJScott]

[center][/center]

[center][size=large]SEE BEST SEX DOLL FEET ADVICE HERE[/size][/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
Standing feet are one of those features that buyers don't think about until they need them, and then they discover the difference is vast. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Get to grips with the difference before you order and you've taken one of the simplest steps towards preventing an irritating purchase.

Everything Follows From the Bolts
The difference comes down to something uncomplicated. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and attempting to stand her will damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.

What Non-Standing Feet Can't Do
Standing feet are a must for photography and display. A doll that stands unaided can be photographed full-length with no evident supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. The primary reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Stability in a Wet Environment
Standing feet are also crucial for shower use. Lying her down in a shower is impractical and dangerous, so showering with your doll means she needs to stand. Metal bolts ensure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. It's a real safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

The Source of a Lot of Damaged Dolls
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. The ankle of a non-standing foot includes foam or filler material, which absorbs water when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become noticeable and being essentially unfixable once it starts. Diligent or not, a doll with non-standing feet should never be in the shower; the water will find its way in whatever precautions you take.

Standing Feet Make Storage Easier
Standing feet can make storage easier as well, depending on the setup. Standing feet let you store the doll upright in a corner, a wardrobe, or a storage cabinet, without a hanging hook or a storage case. Display rather than hiding her away is something this suits well, and it's space-efficient for buyers who don't have room for a hanging setup. Storing the doll in a way that's apparent and accessible is possible with standing feet, and some purchasers prefer that.

Very Tight Budgets and Standing Feet
The cost you pay for standing feet is that they're marginally more costly and somewhat heavier. You'll ordinarily pay a few percent more than for non-standing feet, because the metal bolts add a small quantity of weight and manufacturing is more involved. The difference is small, generally worth the additional cost, and worth knowing about if you're purchasing on a very tight budget.

Distracting in Photos
Another drawback is that the bolts can become noticeable if the feet are bare. On a doll with high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, which some customers find distracting. Closed shoes or footwear that conceals the bolts solve this trivial aesthetic issue, so it's not a reason to stay away from standing feet entirely.

Perfectly Adequate for Many Buyers
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly acceptable, and the savings can go on upgrades such as articulated hands or a better wig. This is an entirely valid choice for purchasers who know what they want.

Not Enough to Decide on Its Own
Non-standing feet are somewhat softer and more adaptable too, and some purchasers find that more comfortable to touch. The difference is subtle and not normally enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

Trying to Stand the Doll Anyway
Forgetting what kind of feet they have, purchasers try to stand the doll anyway, and that's the big risk with non-standing feet. Real damage comes of this common mistake, as the foam inside the ankle can't take the doll's weight and will tear or collapse. Because the feet have been permanently damaged, the result is a doll that can no longer stand even if you attempt to support her. Don't be tempted to test their limits if you're acquiring non-standing feet; remember that they're non-standing.

If You Might Want Them Later
One more question: can a doll that doesn't have standing feet be fitted with them after that? The answer, in short, is no, not easily. Because the bolts are embedded in the soles during manufacturing, adding them subsequently means cutting into the feet and installing new hardware, an expensive process that regularly doesn't work as well as the original. If you're considering buying a doll without standing feet, and you think you might want them later, it's better to buy a doll with standing feet in the first place than to attempt to add them later.

The Safer Option
Selecting between standing and non-standing feet? The practical advice is straightforward. If any of photographing the doll, displaying her standing, or utilising her in the shower is on the cards, you need standing feet. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly sufficient. Not sure? Choose standing feet: nothing is off the table with them, and the small additional cost is worth paying.

Upright Storage for Male Dolls
A gender consideration deserves a mention as well. Broadly, standing feet advantage male dolls more than female dolls, because male dolls are heavier and more tough to store in any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and needs more space. Not having a lot of room? Standing feet give male dolls the ability to store upright, and that's a real benefit.

Weighing Looks Against Function
One final note: the aesthetic difference between standing and non-standing feet. Apparent when the doll is barefoot can be the small hardness at the bottom of standing feet, which the bolts cause. On dolls with fragile features in particular, some buyers find this less aesthetically satisfying, as the hard soles look a little industrial. Non-standing feet are more natural-looking and softer, something some buyers prefer. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

Bolt Care for Standing Feet
Maintenance is another angle that's worth considering. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the fitting tool. Non-standing feet escape this issue because there's no hardware to come loose, which makes them somewhat lower-maintenance long term.

Standing Feet and Flooring
Another effect of the bolts is on how the doll stands on distinct surfaces. The doll is constant on carpet because the bolts grip well there. On smooth hard flooring in particular, the bolts can slip, and the doll may need additional support to stay upright. Sliding is prevented on a hard surface by a small mat or a grippy pad under the feet, which you should consider. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

Barefoot Photos and Exact Proportions
One final consideration, frequently overlooked, is how standing feet affect the doll's overall proportions. Bolts mean a small amount of additional length in the foot, which can marginally change how the doll looks in barefoot photos. This subtle effect, usually invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about exact proportions. The feet are marginally shorter and more natural-looking on non-standing feet, which don't have this effect because they don't have the bolts.

The Better Choice for Everyone Else
The bottom line is that standing feet are worth the additional cost for most buyers, because they open up posing, display, storage, and shower alternatives that non-standing feet don't. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should opt for standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this The No-Nonsense Guide to Modern Sex Dolls- Before You Spend a Penny 6aef938 not to mention The Definitive Rundown of Sex Dolls Right Now- The Real Talk and The Ultimate Look at Sex Dolls Right Now- What Actually Matters. Also check out look at this site for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]