The No-Nonsense Look at Modern Sex Dolls- What Nobody Tells

[FrankJScott]

[center][/center]

[center][size=large]SEE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Nobody gives standing feet an idea until the day they need them, and that's when the enormous difference becomes obvious. It's a small detail on the spec sheet that changes how she stores, how she photographs, how she wears over time, and what you can do with the doll. Grasp the difference before ordering and you'll have avoided a frustrating purchase in one of the simplest ways possible.

What Makes a Foot a Standing Foot
Boiled down, the difference is straightforward. Standing feet have metal bolts embedded in the soles, which permit the doll to stand upright without support. Damage to the feet is the result of trying to stand a doll with non-standing feet, which don't have these bolts and so only allow sitting or lying down. It all hinges on the bolts, with everything else following from whether they're present or not.

The Photographer's Choice
Essential for photography and display: standing feet. A doll who can stand unaided can be photographed in full-length poses without noticeable supports and displayed in a corner, a doorway, or wherever else she needs to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the principal reason most photographers specify standing feet when ordering.

Metal Bolts Keep Water Out of the Feet
Shower use is another thing for which standing feet are critical. Standing is the only sensible way to shower with your doll, because lying her down in a shower is impractical and unsafe. Metal bolts make sure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a real safety consideration.

No Precaution Is Enough
Let's expand on shower use, because a lot of damaged dolls start there. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become noticeable but is basically unfixable once it starts. Nonetheless attentive you are, keep a doll with non-standing feet out of the shower, because the water will find its way in regardless of your precautions.

Standing Storage Explained
In some setups, standing feet also make storage easier. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. This is a space-efficient option for buyers who don't have room for a hanging setup, and it's a great choice for purchasers who want to display the doll rather than keep her hidden. Some customers prefer the noticeable, accessible storage that the standing feet make possible.

A Few Percent More Expensive
The price you pay for standing feet is that they're a little more costly and somewhat heavier. Price-wise, a doll with standing feet is typically a few percent higher than one with non-standing feet; the metal bolts add a small amount of weight and manufacturing is more involved. If you're buying on an incredibly tight budget, know that the difference is small and it's ordinarily worth the extra cost.

A Minor Aesthetic Issue
The bolts can show if the feet are bare, which is the other disadvantage. High-heeled shoes or open-toed footwear on a doll can leave the bolts visible in photos, which some purchasers find distracting. You can solve this trivial aesthetic issue by covering the feet with closed shoes or opting for footwear that hides the bolts, so don't stay away from standing feet completely because of it.

When Standing Feet Aren't Needed
Non-standing feet are cheaper and lighter, and they're fine for buyers who only want to use the doll in bed and don't plan to display her standing or shower with her. Most of her life in a bed or on a sofa means non-standing feet will be perfectly enough, and you can put the savings into other upgrades like articulated hands or a better wig. Entirely valid is this choice for buyers who know what they want.

Not Enough to Decide on Its Own
Some buyers find non-standing feet more comfortable to touch, being slightly softer and more flexible. This is a subtle difference, and it's not ordinarily enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. The feet on non-standing dolls feel less like they have a hard core inside them, and more like the rest of the doll.

Don't Test the Limits
Purchasers forgetting what kind of feet they have and attempting to stand the doll regardless is the huge risk with non-standing feet. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a usual slip-up. The result: the feet are permanently damaged, and the doll can no longer stand even if you attempt to support her. Don't be tempted to test their limits if you're purchasing non-standing feet; remember that they're non-standing.

Why Retrofitting Doesn't Work Well
Another question is whether standing feet can be retrofitted to a doll that doesn't have them. Short answer: no, not readily. The bolts are embedded in the soles during manufacturing, and adding them after that needs cutting into the feet and installing new hardware, which is expensive and regularly doesn't work as well as the original. If you might want standing feet later, and you're considering a doll without them, buying a doll with standing feet in the first place beats attempting to add them later.

Opting for Between Standing and Non-Standing Feet
Purchasers opting for between standing and non-standing feet can follow some straightforward practical advice. Plans to photograph the doll, display her standing or use her in the shower mean you need standing feet. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly sufficient. If you're not sure, standing feet are the safer choice, because they don't limit what you can do with the doll and they're worth the small extra cost.

Why Male Dolls Need Standing Feet More
We should mention a gender consideration as well. Ordinarily, standing feet benefit male dolls more than female dolls, because male dolls are heavier and more difficult to store in any other way. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and needs more space. A real benefit for customers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

Industrial-Looking Soles on Delicate Dolls
A final note is worth making on the aesthetic difference between standing and non-standing feet. On standing feet the bottom is somewhat harder thanks to the bolts, and that can show when the doll is barefoot. Some purchasers don't find this aesthetically satisfying, particularly on dolls with delicate features, since the hard soles look somewhat industrial. The softer and more natural look of non-standing feet is what some purchasers prefer. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

The Maintenance Angle
It's worth considering the maintenance angle as well. Look over the bolts on standing feet now and again to make sure they're secure; a loose bolt can damage the foot or ankle, and a lost bolt can cause the doll to collapse. Every few months, give the bolts a mild twist to check them, and tighten them with the appropriate tool if they feel loose. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them a little lower-maintenance in the long run.

A Small Mat or Grippy Pad
On different surfaces, the bolts affect how the doll stands. On carpet, the bolts grip well and the doll is stable. Extra support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a silky floor. Sliding is stopped on a hard surface by a small mat or a grippy pad under the feet, which you should consider. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

If You Care About Exact Proportions
A final consideration is often overlooked: how standing feet impact the doll's overall proportions. A small quantity of length is added to the foot by the bolts, which can a little change the way the doll looks in barefoot photos. It's a subtle effect that's usually invisible in shoes, yet worth knowing about for barefoot photography when you care about specific proportions. This effect isn't present in non-standing feet, as they don't have the bolts, so the feet are marginally shorter and more natural-looking.

The Bottom Line: Standing Feet Are Worth It
Standing feet are worth the additional cost for most customers, which is the bottom line, because they open up posing, display, storage and shower options that non-standing feet don't. Customers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. For the rest of customers, standing feet are the better choice, and rank among the simplest upgrades to justify. More info at this rosslink. Also check out click for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]