Your Ultimate Primer on Sex Dolls Right Now- What You Need t

[FrankJScott]

[center][/center]

[center][size=large]CLICK HERE FOR BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
It's only when buyers need standing feet that they notice them, and the difference is immense. Small detail on the spec sheet, big consequences: what the doll can do, how she stores, how she photographs and how she wears over time all change. Knowing the difference before you order is among the simplest ways to dodge an irritating purchase.

The Bolts Are the Key
At its most basic, the difference is simple. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. The bolts are the key, and everything else follows from whether they're present or not.

Corners, Doorways and Anywhere Upright
Photography and display both need standing feet. Photographed in full-length poses without apparent supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. The principal reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Water Absorption Leads to Rust
If you want shower use, standing feet are essential as well. Showering with your doll needs her to stand; the alternative, lying her down in a shower, is both impractical and unsafe. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. This is a real safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Rusts the Metal Skeleton
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become visible but is fundamentally unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in anyway of your precautions, no matter how attentive you are.

When You Lack Room for a Hanging Setup
Easier storage is another thing standing feet offer in some setups. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. A decent alternative for buyers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. Some buyers prefer the noticeable, accessible storage that the standing feet make possible.

What Standing Feet Cost
A downside of standing feet: they're marginally more costly and somewhat heavier. Why the premium? The metal bolts add a small quantity of weight to the doll, manufacturing is more involved, and the cost usually ends up a few percent higher than a doll with non-standing feet. Ordinarily worth the extra cost, and small, the difference is still worth knowing about on a really tight budget.

High Heels and Open-Toed Footwear
A further disadvantage is the bolts becoming noticeable if the feet are bare. Distracting to some purchasers is the possibility that the bolts are evident in photos on a doll with high-heeled shoes or open-toed footwear. Closed shoes or footwear that hides the bolts solve this minor aesthetic issue, so it's not a reason to steer clear of standing feet entirely.

Know What You Want
Fine for buyers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly enough and leave money for upgrades like articulated hands or a better wig. A completely valid choice, this, for customers who know what they want.

Maximum Softness
The softer, more elastic feel of non-standing feet, slight as it is, is more comfortable to touch for some purchasers. It's worth knowing about if you're specifically looking for maximum softness, though this is a subtle difference and not typically enough to justify the choice on its own. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

Don't Test the Limits
Forgetting what kind of feet they have, customers try to stand the doll in any case, and that's the huge risk with non-standing feet. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this widespread oversight causes real damage. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. Don't be tempted to test their limits if you're acquiring non-standing feet; remember that they're non-standing.

Can Standing Feet Be Retrofitted?
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. The short answer is no, not easily. Embedded in the soles during manufacturing, the bolts can only be added afterwards by cutting into the feet and installing new hardware, which is expensive and regularly doesn't work as well as the original. Considering a doll without standing feet, and think you might want them later? Buy a doll with standing feet in the first place; it's better than trying to add them later.

Selecting Between Standing and Non-Standing Feet
For customers who are choosing between standing and non-standing feet, the practical advice is direct. You'll need standing feet for photographing the doll, displaying her standing, or using her in the shower. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly acceptable. If you're not sure, standing feet are the safer alternative, because they don't limit what you can do with the doll and they're worth the small extra cost.

A Gender Consideration
It's worth mentioning a gender consideration too. Standing feet ordinarily help male dolls more than female dolls, since they're heavier and more hard to store in any other way. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and needs more space. Not having a lot of room? Standing feet give male dolls the ability to store upright, and that's a real benefit.

A Final Note on Appearance
Worth a final note is the aesthetic difference between standing and non-standing feet. The bottom of standing feet is somewhat harder because of the bolts, something that can be evident when the doll is barefoot. Especially on dolls with fragile features, some purchasers find the marginally industrial look of the hard soles less aesthetically satisfying. Preferred by some buyers, non-standing feet are softer and more natural-looking. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

A Loose Bolt Can Damage the Foot or Ankle
It's worth considering the maintenance angle as well. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out completely the doll can collapse. Tighten the bolts with the fitting tool if they feel loose when you check them every few months by gently twisting. Somewhat lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.

Grip and Stability
The bolts influence how the doll stands on distinct surfaces as well. On carpet, the doll is steady, the bolts gripping well. Bolts can slip on hard flooring, notably a silky floor, so the doll may need additional support to stay upright. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to prevent sliding. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.

The Final Consideration
A final consideration is frequently overlooked: how standing feet impact the doll's overall proportions. A small quantity of length is added to the foot by the bolts, which can somewhat change the way the doll looks in barefoot photos. Normally invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions. Because they don't have the bolts, non-standing feet don't have this effect, and so are somewhat shorter and more natural-looking.

Pick Standing Unless You're Certain
Standing feet are worth the extra cost for most purchasers, which is the bottom line, because they open up posing, display, storage and shower alternatives that non-standing feet don't. Buyers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. For the rest of customers, standing feet are the better choice, and rank among the simplest upgrades to justify. More info at this rosslink. Also check out my blog not forgetting sites such as great post to read and see page for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]