The Definitive Guide to Sex Dolls- Start Here

[FrankJScott]

[center][/center]

[center][size=large]DISCOVER THE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Few buyers think about standing feet beforehand, yet the difference, once they need them, is massive. It's a small detail on the spec sheet that changes how she stores, how she photographs, how she wears over time, and what you can do with the doll. One of the simplest ways to stay away from an annoying purchase is to comprehend the difference before you order.

Bolts or No Bolts
Boiled down, the difference is simple. Metal bolts embedded in the soles of standing feet permit the doll to stand upright without support. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you try to stand her. Everything else flows from the bolts, which are the key, and whether they're present or not.

Why Photographers Specify Standing Feet
When it comes to photography and display, standing feet are critical. Photographed in full-length poses without visible supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. The main reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Showering and Standing Feet
Showering is another case where standing feet are crucial. It's impractical and dangerous to lie her down in a shower, which is why a doll for showering with needs to be able to stand. The metal bolts ensure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. This is a genuine safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

The Source of a Lot of Damaged Dolls
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become noticeable and being fundamentally unfixable once it starts. Never put a doll with non-standing feet in the shower, nonetheless cautious you are, since the water will find its way in regardless of your precautions.

Standing Storage Explained
Standing feet are also easier to store in some setups. Stored upright in a corner, a wardrobe or a storage cabinet, a doll with standing feet doesn't need a hanging hook or a storage case. Space-efficient, this suits purchasers who don't have room for a hanging setup, and it's good for purchasers who want to display the doll rather than keep her hidden. Storing the doll in a way that's noticeable and accessible is possible with standing feet, and some buyers prefer that.

Is the Premium Worth Paying?
The disadvantage of standing feet is that they're somewhat more pricey and slightly heavier. Metal bolts add a small amount of weight to the doll. Manufacturing is also more involved. The upshot is a price that's normally a few percent higher than a doll with non-standing feet. For buyers on a really tight budget it's worth knowing about, even though the difference is small and it's normally worth the extra cost.

Bolts in Photos
The second disadvantage is that bare feet can show the bolts. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some customers find this distracting. The minor aesthetic issue goes away with closed shoes or footwear that conceals the bolts, which means it's not a reason to steer clear of standing feet completely.

Non-Standing Feet: Cheaper and Lighter
Fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly enough, and the savings can go on upgrades such as articulated hands or a better wig. For purchasers who know what they want, this is an entirely valid choice.

Not Enough to Decide on Its Own
Non-standing feet are marginally softer and more adaptable too, and some purchasers find that more comfortable to touch. A subtle difference, not ordinarily enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.

The Big Risk With Non-Standing Feet
The huge risk? Customers forget what kind of feet they have and attempt to stand the doll anyway. This widespread slip-up causes real damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.

Purchase Standing Feet in the First Place
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. The answer, in short, is no, not readily. Embedded in the soles during manufacturing, the bolts can only be added later by cutting into the feet and installing new hardware, which is expensive and regularly doesn't work as well as the original. Thinking of buying a doll without standing feet, but might want them later? Better to purchase a doll with standing feet in the first place than to try to add them later.

The Safer Option
The useful advice for purchasers selecting between standing and non-standing feet is uncomplicated. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet are perfectly adequate if you only want to use her in bed or on a sofa and you don't care about display. Undecided customers are safer with standing feet, which restrict nothing and justify their small additional cost.

Weight and Storage Together
One more thing worth mentioning: a gender consideration. Male dolls tend to upside more than female dolls from standing feet, as they're heavier and more tough to store in any other way. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and requires more space. Storing upright becomes possible for male dolls with standing feet, a genuine benefit if you don't have a lot of room.

Barefoot Photography Priorities
One final note: the aesthetic difference between standing and non-standing feet. The bottom of standing feet is marginally harder because of the bolts, something that can be noticeable when the doll is barefoot. On dolls with delicate features in particular, some buyers find this less aesthetically gratifying, as the hard soles look slightly industrial. Some buyers prefer non-standing feet, which are softer and more natural-looking. The trade-off only matters if you're photographing the doll barefoot; if barefoot photos are a priority, it's worth factoring into your decision.

Maintenance: Check the Bolts Periodically
Consider the maintenance angle too. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out entirely and the doll collapsing, with a loose one damaging the foot or ankle on the way there. By gently twisting the bolts every few months you can check them, and if they feel loose, use the suitable tool to tighten them. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're a little lower-maintenance in the long run.

Stopping Sliding
On distinct surfaces, the bolts influence how the doll stands. With carpet, the bolts grip well and the doll is steady. On hard flooring, the bolts can slip, particularly if the floor is smooth, and the doll may need extra support to stay upright. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it prevents sliding. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.

How Standing Feet Change the Look
How standing feet affect the doll's overall proportions is a final consideration that's frequently overlooked. In barefoot photos, the way the doll looks can be somewhat changed by the small amount of length the bolts add to the foot. It's a subtle effect that's ordinarily invisible in shoes, yet worth knowing about for barefoot photography when you care about specific proportions. Somewhat shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

Choose Standing Unless You're Certain
At the end of the day, standing feet are worth the extra cost for most customers, as they open up alternatives for posing, display, storage and the shower that non-standing feet don't. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. For everyone else, standing feet are the better choice, and they're one of the simplest upgrades to justify. More info at this rosslink. Also check out read what he said bearing in mind visit website and article for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]