The Essential Overview of Sex Dolls Today- No Hype Just Fact

[FrankJScott]

[center][/center]

[center][size=large]SEE THE BEST SEX DOLL FEET ADVICE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
Until the moment they need them, purchasers don't think about standing feet; then they find out the difference is gigantic. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Knowing the difference before you order is among the simplest ways to dodge a frustrating purchase.

Metal Bolts Embedded in the Soles
There's a straightforward basic difference. The doll can stand upright without support because standing feet have metal bolts embedded in the soles. Without these bolts, non-standing feet limit the doll to sitting or lying down, and trying to stand her will damage the feet. Present or absent, the bolts are the key, and everything else follows.

Display Possibilities With Standing Feet
For photography and display, standing feet are vital. Anywhere that requires her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without visible supports. Most photographers specify standing feet when ordering for this main reason: it opens up a wide range of poses and settings that aren't possible with non-standing feet.

Why Showers Demand Standing Feet
For shower use too, standing feet are critical. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and unsafe. In a wet environment the standing feet give her stability, while the metal bolts make sure that the feet don't absorb water the way non-standing feet would. It's a genuine safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

Essentially Unfixable Once It Starts
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. There's foam or filler material inside the ankle with non-standing feet, and it absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become evident but is essentially unfixable once it starts. Irrespective of your precautions, the water will find its way in, which is why a doll with non-standing feet should never be in the shower nevertheless diligent you are.

Evident and Accessible Storage
There's also easier storage with standing feet in some setups. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. This is a space-efficient option for customers who don't have room for a hanging setup, and it's a good choice for buyers who want to display the doll rather than keep her hidden. Standing feet make visible and accessible storage possible, which suits some purchasers best.

What Standing Feet Cost
It's a drawback that standing feet are a little more pricey and a little heavier. A few percent additional on the price is typical compared with a doll with non-standing feet, thanks to a small amount of weight from the metal bolts and a more involved manufacturing process. It's worth knowing about if you're purchasing on an extremely tight budget, though the difference is small and usually worth the additional cost.

Distracting in Photos
The other drawback is that the bolts can become visible if the feet are bare. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be evident in photos, which some customers find distracting. The slight aesthetic issue goes away with closed shoes or footwear that hides the bolts, which means it's not a reason to stay away from standing feet entirely.

Non-Standing Feet: Cheaper and Lighter
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Non-standing feet do the job for a bed-or-sofa doll, and what you save can go towards articulated hands, a better wig or comparable upgrades. A completely valid choice, this, for buyers who know what they want.

A Subtle Difference
Non-standing feet are a little softer and more flexible too, and some customers find that more comfortable to touch. This is a subtle difference, and it's not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

Permanent Damage to the Feet
The huge risk? Buyers forget what kind of feet they have and attempt to stand the doll anyway. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this widespread error causes genuine damage. A doll that can no longer stand, even if you attempt to support her, is the result, because the feet have been permanently damaged. Keep in mind that non-standing feet are non-standing, if that's what you're purchasing, and don't be tempted to test their limits.

Cutting Into the Feet Is Expensive and Risky
Another question is whether standing feet can be retrofitted to a doll that doesn't have them. To put it briefly, not easily, no. During manufacturing the bolts are embedded in the soles; doing it later means cutting into the feet and installing new hardware, which is pricey and regularly doesn't work as well as the original. Purchase a doll with standing feet in the first place, rather than attempting to add them later, if you're considering a doll without them and think you might want them later.

Photography, Display or Shower: You Need Standing Feet
The functional advice for purchasers opting for between standing and non-standing feet is uncomplicated. Plans to photograph the doll, display her standing or use her in the shower mean you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly enough. Unsure which to select? The small extra cost of standing feet purchases you the safer alternative, with no limit on what the doll can do.

Weight and Storage Together
Worth mentioning, too, is a gender consideration. Because male dolls are heavier and more difficult to store in any other way, they generally get more from standing feet than female dolls do. More space and pressure on the body are what a 45kg male doll that can't stand costs you, as he has to be stored lying down. Standing feet give male dolls the ability to store upright, which is a real advantage for buyers who don't have a lot of room.

Weighing Looks Against Function
To finish, the aesthetic difference between standing and non-standing feet is worth noting. Noticeable when the doll is barefoot can be the slight hardness at the bottom of standing feet, which the bolts cause. The hard soles look a little industrial, so some customers find this less aesthetically pleasing, especially on dolls with fragile features. Some buyers prefer the softer, more natural look of non-standing feet. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

The Maintenance Angle
One more angle worth considering: maintenance. Look over the bolts on standing feet now and again to make sure they're secure; a loose bolt can damage the foot or ankle, and a lost bolt can cause the doll to collapse. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the suitable tool. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them somewhat lower-maintenance in the long run.

Smooth Floors Need Extra Support
Different surfaces change how the doll stands, thanks to the bolts. Carpet is where the bolts grip well and the doll is steady. Hard flooring can make the bolts slip, particularly if the floor is silky, so the doll may need additional support to stay upright. Sliding is stopped on a hard surface by a small mat or a grippy pad under the feet, which you should consider. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

Bolts Add a Little Length to the Foot
One final consideration, often overlooked, is how standing feet impact the doll's overall proportions. Adding a small amount of length to the foot, the bolts can slightly change the way the doll looks in barefoot photos. You probably won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about precise proportions. With non-standing feet there are no bolts, so no such effect, and the feet are marginally shorter and more natural-looking.

Who Should Skip Standing Feet
Posing, display, storage and shower options that non-standing feet don't offer are opened up by standing feet, and the bottom line is that they're worth the extra cost for most purchasers. Purchasers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. For everyone else, standing feet are the better choice, and they're one of the simplest upgrades to justify. More info at this rosslink. Also check out web site which is worth considering with go right here which is worth considering with wikipedia reference alongside all additional reading not to mention click here to investigate bearing in mind address which is worth considering with click here for more not to mention index and don't forget read what he said and more info for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]