An Honest Word on Modern Sex Dolls- Before You Spend a Penny

[FrankJScott]

[center][/center]

[center][size=large]VIEW THE BEST SEX DOLL FEET ADVICE TODAY[/size][/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
It's only when buyers need standing feet that they notice them, and the difference is gigantic. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Grasp the difference before ordering and you'll have stayed away from a frustrating purchase in one of the simplest ways possible.

The Bolts Are the Key
Uncomplicated is the basic difference. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. The doll can only sit or lie down on non-standing feet, which lack these bolts, and trying to stand her will damage the feet. The bolts are the key, and everything else follows from whether they're present or not.

Essential for Photography and Display
Photography and display both need standing feet. Standing unaided, she can be photographed in full-length poses without apparent supports, and displayed in a corner, a doorway, or any other spot that needs her to be upright. It opens up a wide range of poses and settings that aren't possible with non-standing feet, which is why most photographers specify standing feet when ordering.

Structural Failure From Water Damage
There's shower use as well, which makes standing feet crucial. Showering with your doll requires her to stand; the alternative, lying her down in a shower, is both impractical and dangerous. Metal bolts make sure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Genuine safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

The Source of a Lot of Damaged Dolls
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become visible but is essentially unfixable once it starts. Never put a doll with non-standing feet in the shower, nevertheless cautious you are, since the water will find its way in anyway of your precautions.

A Storage Option for Display-Minded Buyers
Standing feet can make storage easier as well, depending on the setup. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. A decent alternative for purchasers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. With the standing feet, the doll can be stored noticeably and accessibly, which some purchasers prefer.

A Few Percent More Expensive
Their drawback is simply being marginally more expensive and marginally heavier. The metal bolts add a small amount of weight to the doll, and the manufacturing process is more involved, so the price is generally a few percent higher than a doll with non-standing feet. The difference is small, generally worth the extra cost, and worth knowing about if you're acquiring on an extremely tight budget.

Opting for Footwear That Conceals Them
Bare feet can make the bolts noticeable, which is the other drawback. Distracting to some customers is the possibility that the bolts are apparent in photos on a doll with high-heeled shoes or open-toed footwear. This trivial aesthetic issue is easily solved by covering the feet with closed shoes or by opting for footwear that hides the bolts; it's no reason to steer clear of standing feet entirely.

Perfectly Adequate for Many Buyers
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Non-standing feet are perfectly adequate if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. This is an entirely valid choice for buyers who know what they want.

No Hard Core Inside
There's a small softness and flexibility to non-standing feet that some customers find more comfortable to touch. Not usually enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

A Doll That Can No Longer Stand
It's the forgetful buyer who trips up on non-standing feet, attempting to stand the doll regardless; that's the huge risk. It's a widespread slip-up with real consequences, since the foam inside the ankle can't support the doll's weight and will tear or collapse. The result is a doll that can no longer stand even if you attempt to support her, because the feet have been permanently damaged. If you're buying non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.

New Hardware Rarely Works as Well
Then there's the question of whether standing feet can be retrofitted to a doll without them. The answer, in short, is no, not readily. The original bolts are embedded in the soles during manufacturing, and an after that addition needs cutting into the feet and installing new hardware, which is expensive and regularly not as good. Buy a doll with standing feet in the first place, rather than attempting to add them later, if you're considering a doll without them and think you might want them later.

Photography, Display or Shower: You Need Standing Feet
There's direct sensible advice for purchasers selecting between standing and non-standing feet. Photographing the doll, displaying her standing, or using her in the shower? Then you need standing feet. Non-standing feet are perfectly enough if you only want to use her in bed or on a sofa and you don't care about display. For the unsure, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small additional cost.

A 45kg Male Doll That Can't Stand
There's a gender consideration as well that's worth mentioning. Male dolls are heavier and harder to store in any other way, so they ordinarily upside from standing feet more than female dolls. There's no choice but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and needs more space. With standing feet, male dolls can be stored upright, a real advantage for buyers who don't have a lot of room.

Softer, More Natural Non-Standing Feet
One final note: the aesthetic difference between standing and non-standing feet. Standing feet are a little harder at the bottom, because of the bolts, and this can be apparent when the doll is barefoot. Particularly on dolls with delicate features, some customers find the marginally industrial look of the hard soles less aesthetically pleasing. Softness and a natural look are what non-standing feet offer, and some purchasers prefer them. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Maintenance: Check the Bolts Periodically
Maintenance is another angle that's worth considering. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out completely and the doll collapsing, with a loose one damaging the foot or ankle on the way there. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the suitable tool. Non-standing feet escape this issue because there's no hardware to come loose, which makes them marginally lower-maintenance long term.

Stopping Sliding
The bolts have an effect, too, on how the doll stands on distinct surfaces. The bolts grip well on carpet, so the doll is constant. If the floor is hard, and particularly silky, the bolts can slip and the doll may need extra support to stay upright. Hard surface under the feet? Consider a small mat or a grippy pad to prevent sliding. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

Bolts Add a Little Length to the Foot
One final consideration, regularly overlooked, is how standing feet influence the doll's overall proportions. Bolts mean a small amount of additional length in the foot, which can slightly change how the doll looks in barefoot photos. It's worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions, though this is a subtle effect and ordinarily invisible in shoes. A little shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

Bed-Only Dolls Don't Need Them
The bottom line is that standing feet are worth the additional cost for most purchasers, because they open up posing, display, storage, and shower alternatives that non-standing feet don't. The exception is the buyer who's certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out this article for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]