A Brutally Honest Guide to Sex Dolls- Read Before You Buy

[FrankJScott]

[center][/center]

[center][size=large]SEE THE BEST SEX DOLL FEET ADVICE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: Which Should You Choose
Standing feet go unconsidered until they're needed, at which point purchasers discover the difference is gigantic. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. A frustrating purchase can be stayed away from in one of the simplest ways: understand the difference before you order.

Everything Follows From the Bolts
There's an uncomplicated basic difference. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. Because non-standing feet don't have these bolts, the doll can only sit or lie down; attempting to stand her damages the feet. Present or absent, the bolts are the key, and everything else follows.

What Non-Standing Feet Can't Do
When it comes to photography and display, standing feet are critical. Standing unaided, she can be photographed in full-length poses without noticeable supports, and displayed in a corner, a doorway, or any other spot that requires her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the principal reason most photographers specify standing feet when ordering.

Showering and Standing Feet
Also critical is standing feet for shower use. Standing is the only reasonable way to shower with your doll, because lying her down in a shower is impractical and risky. In a wet environment the standing feet give her stability, while the metal bolts make sure that the feet don't absorb water the way non-standing feet would. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a real safety consideration.

Weeks or Months Before the Damage Shows
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. Non-standing feet contain foam or filler material inside the ankle, and wet conditions make that material absorb water. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become noticeable and being essentially unfixable once it starts. However careful you are, keep a doll with non-standing feet out of the shower, because the water will find its way in regardless of your precautions.

No Hanging Hook or Storage Case Needed
Standing feet are also easier to store in some setups. Standing feet let you store the doll upright in a corner, a wardrobe, or a storage cabinet, without a hanging hook or a storage case. Display rather than hiding her away is something this suits well, and it's space-efficient for customers who don't have room for a hanging setup. The standing feet make it possible to store the doll in a way that's noticeable and accessible, which some customers prefer.

Small Difference, Usually Worth It
The cost you pay for standing feet is that they're somewhat more costly and slightly heavier. Slightly more weight comes from the metal bolts, and the more involved manufacturing process pushes the price normally a few percent above a doll with non-standing feet. Ordinarily worth the extra cost, and small, the difference is still worth knowing about on a really tight budget.

High Heels and Open-Toed Footwear
If the feet are bare, the bolts can become noticeable; that's the other drawback. Photos of a doll in high-heeled shoes or open-toed footwear might show the bolts, which some customers find distracting. No reason to avoid standing feet entirely, since this slight aesthetic issue can be solved with closed shoes or footwear that hides the bolts.

The Case for Non-Standing Feet
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Most of her life in a bed or on a sofa means non-standing feet will be perfectly enough, and you can put the savings into other upgrades like articulated hands or a better wig. This is an entirely valid choice for customers who know what they want.

No Hard Core Inside
The softer, more pliable feel of non-standing feet, slight as it is, is more comfortable to touch for some buyers. On its own this subtle difference doesn't generally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

The Big Risk With Non-Standing Feet
Forgetting what kind of feet they have, customers attempt to stand the doll in any case, and that's the huge risk with non-standing feet. Real damage comes of this typical oversight, as the foam inside the ankle can't take the doll's weight and will tear or collapse. Because the feet have been permanently damaged, the result is a doll that can no longer stand even if you attempt to support her. Keep in mind that non-standing feet are non-standing, if that's what you're purchasing, and don't be tempted to test their limits.

Bolts Are Embedded During Manufacturing
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. Not readily; that's the short answer. Manufacturing is when the bolts get embedded in the soles; after that, you'd have to cut into the feet and install new hardware, which is pricey and frequently doesn't work as well as the original. If you're considering buying a doll without standing feet, and you think you might want them later, it's better to acquire a doll with standing feet in the first place than to attempt to add them later.

Functional Advice by Use Case
The useful advice for customers picking between standing and non-standing feet is uncomplicated. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. Perfectly acceptable are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. If you're not sure, standing feet are the safer option, because they don't limit what you can do with the doll and they're worth the small extra cost.

Room for Storage Is a Real Concern
There's a gender consideration as well that's worth mentioning. More than female dolls, male dolls ordinarily upside from standing feet, being heavier and more difficult to store in any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. A real upside for customers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

What Barefoot Photos Reveal
The aesthetic difference between standing and non-standing feet is worth a final note. On standing feet the bottom is slightly harder thanks to the bolts, and that can show when the doll is barefoot. Some buyers don't find this aesthetically pleasing, particularly on dolls with fragile features, since the hard soles look slightly industrial. More natural-looking and softer are non-standing feet, which some purchasers prefer. Barefoot photos being a priority makes this trade-off worth factoring into your decision, since it only matters if you're photographing the doll barefoot.

The Maintenance Angle
There's a maintenance angle as well that's worth considering. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out totally and the doll collapsing, with a loose one damaging the foot or ankle on the way there. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the appropriate tool. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're somewhat lower-maintenance in the long run.

Grip and Stability
The bolts also influence how the doll stands on distinct surfaces. Carpet suits the bolts, which grip well, leaving the doll steady. The doll may need extra support to stay upright when the bolts slip on hard flooring, particularly a smooth floor. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

Normally Invisible in Shoes
One final consideration, frequently overlooked, is how standing feet impact the doll's overall proportions. The way the doll looks in barefoot photos can slightly change, as the bolts add a small amount of length to the foot. Typically invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions. Marginally shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

Posing, Display, Storage and Shower Options
What it comes down to is that most buyers will find standing feet worth the additional cost, since they open up posing, display, storage, and shower alternatives that non-standing feet don't. Who can skip them? Purchasers who are certain the doll will only be used in bed and won't be displayed or photographed standing. For all other purchasers, standing feet are the better choice and among the simplest upgrades to justify. More info at this rosslink. Also check out see post on top of go to this website not forgetting sites such as recommended you read not forgetting sites such as read the article alongside all click here for more info not to mention index which is worth considering with read the full info here together with check my source which is worth considering with find here and other for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]