A Quick Rundown of Sex Dolls- Read Before You Buy

[FrankJScott]

[center][/center]

[center][size=large]DISCOVER BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
Until the moment they need them, buyers don't think about standing feet; then they find out the difference is vast. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Preventing an irritating purchase is straightforward enough if you grasp the difference before you order.

The Bolts Are the Key
The basic difference couldn't be simpler. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you try to stand her. It all hinges on the bolts, with everything else following from whether they're present or not.

The Photographer's Choice
Photography and display both require standing feet. If a doll can stand unaided, full-length poses without evident supports are possible, as is display in a corner, a doorway or anywhere else that needs her to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for precisely that reason.

Standing Feet Are Also Essential for Showers
In the shower, too, standing feet are necessary. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and hazardous. In a wet environment the standing feet give her stability, while the metal bolts make sure that the feet don't absorb water the way non-standing feet would. Structural failure in the end, and rust, can come from water absorption in non-standing feet; that's why this is a genuine safety consideration.

Why Shower Use Destroys So Many Dolls
Let's expand on shower use, because a lot of damaged dolls start there. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. Water rusting the metal skeleton inside the leg takes weeks or months to become noticeable, yet once it starts it's essentially unfixable. Nevertheless cautious you are, keep a doll with non-standing feet out of the shower, because the water will find its way in irrespective of your precautions.

Apparent and Accessible Storage
Standing feet bring easier storage, too, in some setups. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. For purchasers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a solid choice. Standing feet allow storage that's apparent and accessible, something some customers prefer.

Small Difference, Usually Worth It
A drawback of standing feet: they're slightly more pricey and slightly heavier. Price-wise, a doll with standing feet is usually a few percent higher than one with non-standing feet; the metal bolts add a small quantity of weight and manufacturing is more involved. The difference is small, and it's ordinarily worth the extra cost, but it's worth knowing about if you're acquiring on an incredibly tight budget.

Bolts Showing When the Feet Are Bare
The other downside is that the bolts can become evident if the feet are bare. Some customers find it distracting that the bolts might be evident in photos on a doll with high-heeled shoes or open-toed footwear. This is a trivial aesthetic issue, and it can be solved by covering the feet with closed shoes or by opting for footwear that hides the bolts, so it's not a reason to avoid standing feet completely.

Savings for Articulated Hands or a Better Wig
They're cheaper and lighter, and non-standing feet are fine for buyers who only want to use the doll in bed and don't plan to display her standing or shower with her. For a doll who'll largely be on a bed or sofa, perfectly adequate non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. A totally valid choice, this, for purchasers who know what they want.

A Subtle Difference
Non-standing feet are somewhat softer and more elastic, and some purchasers find them more comfortable to touch as a result. Not usually enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. Less like they have a hard core inside them and more like the rest of the doll is how the feet on non-standing dolls feel.

The Big Risk With Non-Standing Feet
Purchasers forgetting what kind of feet they have and attempting to stand the doll in any case is the big risk with non-standing feet. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this widespread error causes genuine damage. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. You're purchasing non-standing feet? Remember it, and don't be tempted to test their limits.

Why Retrofitting Doesn't Work Well
And what about retrofitting standing feet to a doll that doesn't have them? Short answer: no, not easily. During manufacturing the bolts are embedded in the soles; doing it after that means cutting into the feet and installing new hardware, which is pricey and frequently doesn't work as well as the original. Attempting to add standing feet later is worse than purchasing a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, purchase them first.

Useful Advice by Use Case
Simple is the sensible advice for customers picking between standing and non-standing feet. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. Non-standing feet are perfectly acceptable if you only want to use her in bed or on a sofa and you don't care about display. Unsure which to choose? The small extra cost of standing feet buys you the safer choice, with no limit on what the doll can do.

Why Male Dolls Need Standing Feet More
A gender consideration is also worth mentioning. Male dolls typically benefit from standing feet more than female dolls, because they're heavier and more tricky to store in any other way. A 45kg male doll that can't stand has to be stored lying down, and that puts pressure on the body and needs more space. It's a real upside for customers who don't have a lot of room that standing feet let male dolls store upright.

Industrial-Looking Soles on Delicate Dolls
The aesthetic difference between standing and non-standing feet deserves a final note. Because of the bolts, standing feet are a little harder at the bottom, which can be evident when the doll is barefoot. Especially on dolls with fragile features, some purchasers find the a little industrial look of the hard soles less aesthetically gratifying. Softness and a natural look are what non-standing feet offer, and some customers prefer them. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

No Hardware to Come Loose
Worth considering, too, is a maintenance angle. Look over the bolts on standing feet now and again to make sure they're secure; a loose bolt can damage the foot or ankle, and a lost bolt can cause the doll to collapse. Every few months, check the bolts by gently twisting them, and tighten them with the fitting tool if they feel loose. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them marginally lower-maintenance in the long run.

Grip and Stability
Another effect of the bolts is on how the doll stands on different surfaces. Grip is great on carpet, and the doll is stable. If the floor is hard, and especially silky, the bolts can slip and the doll may need additional support to stay upright. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it prevents sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

Barefoot Photos and Exact Proportions
A final consideration is often overlooked: how standing feet influence the doll's overall proportions. Adding a small quantity of length to the foot, the bolts can slightly change the way the doll looks in barefoot photos. It's a subtle effect that's ordinarily invisible in shoes, yet worth knowing about for barefoot photography when you care about specific proportions. Without the bolts, non-standing feet don't have this effect, and the feet are a little shorter and more natural-looking.

The Better Choice for Everyone Else
Bottom line: for most purchasers standing feet are worth the additional cost, opening up posing, display, storage and shower alternatives that non-standing feet don't. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out website bearing in mind important source not to mention this hyperlink as well as you could check here which is worth considering with more which is worth considering with visit the website together with full article alongside all have a look at this website not forgetting sites such as recommended site and go to this site for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]